Register / Log in
After downloading and installing the EWD app you can register as a driver by pressing Register on the login screen.
Fill all required fields and proceed, you will receive an email containing a One Time Password to verify, once this is done your driver account will be ready to log in.
Alternatively your Operator may have already registered you as a driver via the web portal and provided you with a password.
Login to the EWD app using your email and password.
When logging in for the first time you will need to provide further information such as Base Location and timezone, Record Keeper location, licence number and state of issue. These details can always be changed/updated from the Profile screen in the app.
After updating your details you can proceed to starting a shift.
Starting a Shift
You can start a shift or view your existing shift from the Work screen.
To start a new shift press Start Shift.
Press on each field to select options from a drop down menu or to enter details manually. You may start your shift in work or rest. Once a Work/Rest Option is selected it will apply to all work & rest entries for the entire shift until the shift is submitted. BFM rulesets require a BFM approval ID.
Once you start the shift a time circular graph will appear accompanied by a set of timers.
The circular graph displays any period of 24 hours or less. It will always prioritise displaying the period that is ending soonest and has not had the sufficient rest required.
Additional timers will display the Current Time of the drivers base timezone, Time remaining till rest is due, Total work for the current shift, Total work for the current shift, Night work and rest for the current shift.
Rest alerts will display on the work screen and will appear as a blue pop-up at the bottom of the screen. It will warn of upcoming rest due when 1 hour of work remains for the period. It will continue to warn the driver every 10 minutes until rest is taken or a potential non-compliance event occurs.
When a potential non-compliance event is detected it will display in red at the top of the work screen. It will continue to display for the remainder of the period until the shift is submitted.
To start a rest break move or press the slider from Work to Rest. You will need to enter the Odometer reading, location will be prefilled but can be changed, comments are not required but may be added.
The circular graph when in rest will display a 24 hour clock face, time in work is coloured blue and rest is coloured red. In the centre of the graph it will display a counter for the current rest break, below that it will show the required rest for the current period. When you are ready move the slider back to work or click on Check/Submit to proceed to submit the shift.
Starting a Two-up Shift.
If a two-up work/rest option is selected you will need to enter the second driver's Name, licence number, licence state of issue & BFM approval ID if applicable. You will need to confirm the second driver's details are correct by confirming the two-up driver declaration. Only one driver can be logged in at a time. If both drivers will be using the same device each driver must log out to allow the other driver to login and make work & rest changes.
Adding and Editing Work/Rest Entries
If you have missed a work/rest entry for your shift you can add or edit a work/rest entry.
From the Work screen press the Check/Submit button. It will display all work & rest entries for your current shift in a table.
Pressing the Pen icon in the Edit column will allow you to edit the entry.
Start time, Odometer & Location can be changed. All changes must be accompanied by a comment.
To add a work/rest entry press the + icon in the upper right, select the type of activity, start time, odometer reading, location and comment then press Save to create the entry.
Submitting Shift
When you are ready to submit your shift press Check/Submit from the Work screen then Submit Shift you will need to enter your password to confirm you agree to the declaration the press Confirm Submission to complete the process.
Editing Your Profile
To update any details for your profile, you can notify your Record Keeper to update your profile. It can also be done via the EWD app by navigating to the Profile screen.
At the top of this screen will be your name and Unique Driver Identifier, Press on this to view/edit your details. Click Save at the bottom of the screen to save the changes otherwise press the back button in the upper left to cancel any changes.
Changing Theme
From the Profile screen clicking Theme Mode allows you to change the colour theme of the app to System default, Light or Dark mode to reduce eye strain.
Accepting Invitations
If your Driver account was registered through the EWD app you will only be able to log into the app. To allow a Record Keeper or Operator account access to view your shifts, add historical shifts and generate reports a Record Keeper can send an invitation to the driver to associate the Driver account with an Operator.
In order for a record keeper to send an invitation they will require the email address associated with your driver account along with your licence number.
The Invitations screen will display all Operators that have invited the driver to associate their account. Press Accept twice to accept the invitation, once accepted Accepted in green will appear next to the invitation. The record keeper will now be able to view your shift data and add historical data from the past 28 days.
Synchronisation
The Netcorp EWD app is designed to synchronise with our servers every 15 minutes. When synchronisation is successful you will see a green sync icon in the upper right of the screen.
If the device you are using loses network connectivity the sync icon will change and turn red to indicate it is failing synchronisation. This may occur when travelling in areas with poor cellular reception.
You need to ensure your device is able to re-connect to the internet either by using a cellular network or using WiFi in order to resynchronise your shift data with Netcorps EWD servers. The EWD is designed to resynchronise automatically once the network connection is re-established but you can also press on the sync icon to force a resync.
Device Failures & Malfunctions
Storage Failure
If the device the Netcorp EWD app is installed on is running low on memory (<50MB of space remaining) a red warning will appear on the active shift screen above the timers stating "Critical Storage Usage".
To clear this message you must free up space on the device by uninstalling unused apps or deleting unnecessary data so the EWD can continue to record work & rest entries. If you are unable to remove enough data to clear the warning message you should submit your shift immediately and switch to a written work diary for the remainder of your shift. You should also inform your Record Keeper that your device is running low on storage space as it will likely need to be upgraded in order to maintain a compliant electronic work diary.
Communication Failure
When the device the Netcorp EWP app is installed on loses network connectivity an orange warning will display on the active shift screen above the timers stating "Communication Failure"
This can be a normal occurrence in remote areas as the mobile network may not be accessible in all locations. The device can continue to be used and the warning will clear once it regains network connectivity.
If the device has not regained network connectivity for more than 24 hours the warning will change to red and display the words "Critical Communication Failure". You should attempt to connect the device using WiFi if your device supports it to synchronise your current shift with the Netcorp EWD server. You should also investigate why the device is unable to connect to the mobile network. Check the SIM card is not damaged and is correctly inserted into the device's SIM card slot. If the device is unable to regain network connectivity you must either switch to a known working device with the Netcorp EWD installed, your last synchronised active shift entries will automatically populate in the new device. Otherwise you must copy your work & rest entries into a written work diary and notify your Record Keeper as soon as possible.
Display Failures
In the case where your device's display can no longer be used you may switch to a known working device with the Netcorp EWD installed. Providing the previous device was not suffering any communication failures your work & rest entries will re-synchronise on the new device and you will be logged out from the previous device. Alternatively you may switch to a written work diary until you are able to obtain a working device. Contact your Record Keeper to report the issue with your device, they will also be able to view your last synchronised work & rest entries from the Netcorp EWD website so that they may be copied over to your written work diary.
Power Failures
If your device loses power try connecting it to a suitable power source to recharge the device. If the device fails to regain charge you should either switch to a known working device with the Netcorp EWD app installed, your work & rest entries will re-synchronise upon login or use a written work diary. Notify your Record Keeper of the device failure immediately, they will be able to view your last synchronised work & rest entries from the Netcorp EWD website so that they may be copied over to your written work diary.
Reporting Faults & Malfunctions
Faults and malfunctions should be reported to Netcorp via the EWD app.
Click on "Profile" on the navigation bar at the bottom of the screen.
Enter all relevant information into the text field and click "Submit" when done.
Provided the device has an active network connection the report will be submitted, otherwise an error will display indicating the report cannot be submitted due to lack of network connectivity.
If the device is unable to obtain a network connection you should notify your Record Keeper immediately as faults can be submitted via the Netcorp EWD website.
Alternatively faults and malfunctions can be reported to Netcorp Support by the methods provided below:
- Email: ewdfaults@netcorp.com.au
- Phone: 1300 722 127 (option 1), Mon-Fri 8am-5pm AEST
Reports of EWD faults and malfunctions should also be sent to the NHVR. They have a dedicated form on their website https://www.nhvr.gov.au/contact-us.
They can also be reached on:
- Email: info@nhvr.gov.au
- Phone: 13 64 87
Got a question this didn't answer?
Call us, email us, or check the FAQ.